Ống mềm nối sprinkler – Nhập khẩu TNT Việt nam- Vikingong deo inox-sprinkler-ong- mem-noi-dau-phun-TNT- Viet-NAm 02422625656ống-mềm-nối-đầu-phun-sprinkler-Hàn-Quốc- DAEJIn – TNT VIET NAM

Asembly intructions /Flexible hose Daejin

  • Giá thị trường: Liên hệ

    Một bộ bao gồm:

    ống nối mềm nối đầu phun tùy kích thước khách hàng lựa chọn :

    + REDUCER ( Giảm ) loại 1/2”.
    + NIPPLE loại 1/2”
    + Kẹp thanh (Center Bracket)B-CC-B
    + Kẹp ống (Middle Bracket) B-ES-B
    + Thanh giữ ống ( Square bar) : dài 700mm
    Áp lực của ống mềm đạt 14-16bar LPCB, 175psi
    Đầu vào 1” đầu ra 1/2” và 3/4”

    ASSEMBLY INSTRUCTIONS

    Daejin’s brackets are very easy and simple to install with flexible sprinkler joints to suspended ceiling.
    Its open cap design of center bracket solves all the problems which arise installing flexible sprinkler joints to ceiling.
    1. Connect the branch line connection nipple to the branch line
    2. Connect the nut of the flexible hose to the branch line connection nipple
    3. Tighten the nut of the flexible hose to the reducing nipple
    4. Assemble two end brackets and a center bracket to a square bar.
    Place two end brackets to the aimed position of the rails of suspended ceiling properly and tighten wing nuts to a torque of 20-25 kgf.cm

    5. Locate the center bracket to a desired position of the square bar and join the reducing nipple to the center bracket. Tighten the nut to a torque of 20-30 kgf.cm
    6. Join a sprinkler to the reducing nipple of the flexible hose.
    The sprinkler can be installed to the reducing nipple on the floor in advance.

        

    Technical Data

    Temperature 225 oF
    Working pressure 175 psi
    Maximum Bend Radius 4″ (UL type), 8″ (FM type)
    K-Factor 1/2″ Outlet 5.6 gpm
    3/4″ Outlet 11.2gpm(UL), 8.0gpm(FM)

    Friction Loss Data

    Lenght Nominal Inlet by Outlet Size, in. Assembly Length, (units) Max No. of 90° Bends Max Bend Radius, (units) Equivalent Length of 1 in. Schedule 40 Steel Pipe (C=120), ft
    700 1/2″, 3/4″ 700 UL(1), FM(1) 100 UL type (24, 30), FM type (17.9, 14.4)
    1000 1/2″, 3/4″ 1000 UL(2), FM(1) 100 UL type (44, 48), FM type (22.2, 18.3)
    1200 1/2″, 3/4″ 1200 UL(2), FM(4) 100 UL type (49, 55), FM type (37.0, 32.8)
    1500 1/2″, 3/4″ 1500 UL(2), FM(4) 100 UL type (59, 64), FM type (45.5, 43.2)
    1800 1/2″, 3/4″ 1800 UL(3), FM(5) 100 UL type (84, 86), FM type (63.0, 58.7)

    Features

    Length 700, 1000, 1200, 1500, 1800mm
    Reducing nipple Dia 1/2″, 3/4″ NPT or BSPT (Straight or 90 degree elbow)
    Type Unbraided UL certificate
    Braided (ø 26.8) UL and FM approval
    Braided (ø 28) FM approved